Skip to the page
Kirkland Lantern Co

What Christmas Light Installation Costs in Kirkland

In Kirkland, the price of having holiday lights put up comes down to how many feet of roofline get lit, how high the ladder goes, and whether the lights come down again in January.

Ask an installer for a price

Published prices for christmas light installation

Job Published range Source
Roofline outline only, labour included $250 to $1,500 HomeGuide
Full package: roofline, windows, garage and landscaping $750 to $5,000 HomeGuide
Installed, per linear foot $5 to $12 HomeGuide
Takedown, when the package leaves it out $100 to $400 HomeGuide
A typical job on a 1,500 sq ft house $250 to $650 (average $450) Fixr
Lights and labour, per linear foot $2 to $5 Fixr
Removal, per job $125 to $350 Fixr

National figures from two cost guides, not quotes. Neither publishes a number for Kirkland. HomeGuide: updated 2025-10-01, read 2026-11-12; Fixr: updated 2025-01-31, read 2026-11-12.

Christmas lights installed in one long run along the gutters and up the front gable of a two-storey cedar house at night, reflected in puddles on the drive

How much should I pay someone to put up my Christmas lights?

The two cost guides in the table above do not agree, and the gap is worth understanding before any quote arrives. HomeGuide's range for a plain roofline outline runs from $250 to $1,500 with labour included, and its rate per foot is $5 to $12. Fixr puts a typical job at $250 to $650 and its rate at $2 to $5 a foot. At the bottom they meet. At the top, HomeGuide's figure is more than double Fixr's.

Most of the difference is in what each range counts. Fixr splits its per-foot figure into $1.50 to $3.50 of labour and $0.50 to $1.50 of strands, and its sample house is a single 1,500-square-foot home. HomeGuide's ranges stretch to three-storey houses and to full packages with the windows, the garage and the planting lit as well. Neither guide publishes a figure for Kirkland or anywhere in the Seattle area, so treat both as a frame for a quote rather than a forecast of one.

Both agree on the unit. Installers price lights by the foot of the run, then adjust for how hard that run is to reach.

This guide covers seasonal lights that go up in the fall and come down in January. Track systems that stay on the house all year are priced on a different scale; see what permanent christmas lights cost for those.

What does a 200-foot run of lights cost?

HomeGuide prices 200 linear feet at $1,000 to $2,400 installed. Fixr's per-foot rate gives $400 to $1,000 for the same run. That second figure is our arithmetic on Fixr's published rate (200 feet at $2 and at $5), not a number Fixr prints.

Two hundred feet is more house than it sounds. Fixr suggests at least 150 feet of lights for a 1,500-square-foot home, and HomeGuide puts a mid-sized house at 100 to 300 feet and a smaller one with a basic outline at 50 to 200. A rough count of your own run, before anyone comes out, makes the first conversation shorter:

What changes the price of holiday light installation

Storeys and roof pitch

HomeGuide's ranges by storey, covering both simple outlines and full packages, are $250 to $2,400 for one storey, $500 to $3,600 for two and $750 to $5,000 for three. Height means longer ladders and more time moving them. It also brings Washington's fall-protection rule into play for an installer with employees: an employer must provide fall protection where workers are exposed to a fall of four feet or more (WAC 296-880-20005). A steep gable over the front door takes longer than a flat run above the garage, and the quote reflects it.

Trees and planting

A wrapped tree uses far more lights per foot of height than a gutter does per foot of length, and it takes longer. An installer will ask how many trees, roughly how tall, and whether the wrap covers the trunk only or reaches into the branches, because each answer changes the hours and the number of strands.

Whose lights go up

Some installers supply the lights, take them down and keep them until next season. Others will hang a homeowner's own strands, usually for less. If you supply them, ask who replaces a strand that fails in December, and whether a service visit costs extra.

Power and timers

A roofline needs an outdoor outlet within reach and a timer, so the lights come on at dusk without anyone remembering. Fixr prices a plug-in timer at $12 to $50. Adding an outlet the house does not have is electrical work, and Washington regulates electrical installation under RCW 19.28. Ask an installer how hardwired work is permitted before anyone plans on a new circuit.

What does it cost to have the lights taken down?

When takedown is not already in the package, HomeGuide prices it at $100 to $400. Fixr gives $125 to $350 a job, or $0.50 to $0.65 a foot, and says most companies fold it into the installation price. When the installer supplied the lights, they leave with the installer in January; ask whether keeping them until next season is part of the price.

HomeGuide reports that many installers return two to four weeks after New Year's Day. In Kirkland that lands in January, a month that averages 5.78 inches of rain at Sea-Tac in NOAA's 1991 to 2020 normals, so the takedown date often moves with the weather. Ask for a window rather than a single day.

Reading a Kirkland quote line by line

A national range tells you whether a quote is in the right territory. The quote for your own house should tell you more than that. Before you agree to one, check that it shows each of these:

A quote that leaves out the takedown window or the footage is not necessarily wrong, but it is hard to hold up against the next one.

If you would rather describe the house once and have a price come back for it, the christmas light installers in Kirkland who work through this site receive the request directly. Nothing about it obliges you to accept the figure they send.

More questions about installation prices

Is takedown included in the price?

Often, but not always. HomeGuide lists takedown at $100 to $400 when a company leaves it out of the package, and Fixr puts removal at $125 to $350 a job. Ask for the takedown fee and the week it happens on the quote itself.

Do I pay less if I already own the lights?

Usually, if the installer will hang them at all. HomeGuide notes that some companies put up a customer's own strands for less, while others only use lights they rent out, which are easier for them to install and store.

What does a permanent system cost next to a seasonal one?

Far more up front. Track lighting that stays on the house is priced per foot at several times the seasonal rate, and the page on what permanent christmas lights cost has the published figures and the arithmetic on when it pays back.

Do businesses pay the same rates?

The national guides price houses, not shopfronts or HOA entrances. A commercial christmas light installation in Kirkland is priced site by site, from the frontage, the trees, the access and the hours the lights have to run.

Does the quote include the electricity?

No, the power is on your own bill. HomeGuide puts a medium LED display on for 6 to 8 hours a night at a few dollars for the whole season. In mid-December the sun sets in Kirkland at 4:17 pm, so a timer set from dusk to 11 pm runs for close to seven hours.

What is the average cost for someone to put up Christmas lights?

Fixr's national average is $450 for a 1,500-square-foot house, inside a range of $250 to $650. HomeGuide's range for a basic roofline runs from $250 to $1,500. For your own house, the christmas light installers in Kirkland who receive a request price the actual run.

A price for your house, not a national average

Send the run, the storeys and the trees once. An installer who works in Kirkland reads it and prices that job.

Ask for a local price

Step 1 of 2: the lights

Your lighting request

Which kind of lighting?
When would you like them up? Optional

It helps the installer plan the visit.